Tiokol,Tiakol,Tiyakol,Thiokol,Cam macunu,Cam ilacı,Nem alıcı,Cam çıtası,Butil,Klips,Mantar,Cam mantarı,Isıcam,Macun,Çift cam sızdırmazlık,Sızdırmazlık macunu,Polysulfide sealant,Polysulfide sealant Turkey,Glass sealant,Insulation,Insulated glass,Glass insulation,Glass,Double glazing,Molecular sieve,Silica gel,Butyl,Aluminium spacer bar,Hotmelt,Corner,Clips,Glass Cork,Putty,Sealant
TIOMOL is a mixture of natural desiccants (zeolite-based adsorbents) and natural binders formed in granules. The product is designed for static water adsorption process with very low adsorption speed. The product can reach very good water adsorption capacity.
AREA OF APPLICATION
Adsorbent for insulation glass manufacturing and air drying applications. Usage the product minimizes possibility of condensate between glass panes of an insulation glass unit.
The product has the following advantages:
high adsorption capacity;
low initial adsorption speed;
low gas desorption that minimize glass deformation;
no dust content;
storable packaging, long shelf life.
granules from beige to light grey
2. Granule sizes
3. Granule size ratio
830 g/l +/-5%
6. Adsorption capacity (H2O) at RH 32% and 23ºС
7. Dust after mixing 30 min
8. Gas desorption at 70°С (nitrogen/argon) for 250 g
9. Ignition loss at 950°С
10. Delta T for 20 g of mol. Sieve and 20 ml water at 23 +/-3°С
METHOD OF APPLICATION
Before using Delta-T, value must be measured to conform adsorption efficiency of the product. Filling into spacer can be done by hand or by desiccant filling machines and equipment.
Opened boxes should be used within 48 hours. The opened product should be stored in conditions where air contact is minimized.
After filling process into spacers, the system should be sealed in 3 hours.
Recommended storage temperature: +10°С to +30°С. Shelf life – 24 months in original closed packaging.
25 kg carton boxes with PVC bags inside
|BASE Polyisobutylene and synthetic rubber base and solvent free|
|DENSITY Approy. 1||45 gr./cm3. DIN 53479 ( +24 °C )|
|WAPOUR TRANSMISSION < 0||15 g / m² - day. 2 mm. EN-1279-4|
|GAS (ARGON) PERMEATION < 0||012 g / m² - h. 2 mm EN-1279-4|
|HARDNESS 45 – 50 SHORE ( +23°C )|
|APPLICATION TEMP. 165 – 175°C|
|APPLICATION CONDITIONS ● Application area should be more than 15°C and applied material should be conditioned at min 15°C before HOTMELTapplication|
|● The surface must be clean from dust and Grease anddry.|
|ADHESION Good adhesion to glass||Aluminium and Steel|
|PACKAGING Disposable white carton box. Content : 7||5 Kg. Storage|
|APPLICATION AREA Insulating Glass unit and insulating special places from water and automobile industry|
|Not regarded as a health or environmental hazard under current|